As you all know Bob White's instructional videos are very informative and helpful, take your time to let him know how appreciative you are to have his videos available for the RC heli community. HeliTown.COM would like to thank Bob White (finless) for allowing us to continue to provide links to his videos. Don't forget to bookmark this page for your convince.

Bob White is building a Trex600 and shooting videos for you. Always check back for more!

Note: You need to register with www.Helifreak.com before you can download these videos if it is your first time. The registration is free. HeliTown.COM does no own or has any control on these videos, we only provide links.

• This page contains his general how to instructional videos
• This page contains his Trex HDE 450 and Trex 450 450s videos
• This page contains his Lepton build instructional videos
• This page contains his new HDX300 build instructional videos

Video Titles

• Trex 600 announcement video

What is in the box?

• What's in the box!! (18 Megs)

Build/Set Up Videos

• Steps 1 and 2 - Blade grips and head (18 Megs)
• Step 3 - Seesaw and flybar (50 Megs)
• Steps 4, 5 & 6 - Head, washout, and swash plate (20 Megs)
• Steps 7 & 8 - Main gear and frames (25 Megs)
• Step 9 - Tail Drive Assembly (10 Megs)
• Steps 10 & 11 - Trays, Motor mount, and Control arms (20 Megs)
• Steps 12 - Landing Gear (9 Megs)

Step 17 servo install and head set up (step 13 was skipped)

• Servo Install and linkage setup (44 Megs)
• Head and link setup (30 Megs)
• Installing the motor and setting the pinion (15 Megs)
• Installing the electronics (38 Megs)

Step 13 and doing the tail of the heli and this will include setting up the servo

• Tail boom, tail case, and tail shaft (30 Megs)
• Tail pitch slider and tail hub (22 Megs)
• Boom supports and fins (22 Megs)
• Tail servo and gyro setup (35 Megs)

Final comments from Bob White

• Final comments (6 Megs)

Thank you, Bob.